PRE-SELECT TOOLWould you be able to CE-mark the Hybrid beam? Peikko and Anstar are marking their products according to EN1090-1
No, we produce the Hybrid beams according to polish KOT (Krajowa Ocena Techniczna – Polish National Technical Assessment).
No, we produce the Hybrid beams according to polish KOT (Krajowa Ocena Techniczna – Polish National Technical Assessment).
The standard fire protection of Hybrid beams is for R120. Additional protection (up to R240) can be realized by applying a CARBOLINE fire-resistant mortar (wet-mix spray).
The beams continuation through the support can be done by a bolted connection using appropriate column shoes, which are able to transfer the moment on the support in a multi-span grider.
This type of connection is usually located at a distance of 0.25-1.5 m from the beam support.
The ring beam is usually integrated in the Hybridbeam body, i.e. the beam’s reinforcement is used as a ring’s reinforcement. In addition the Hybridbeam must be equipped in the front part with reinforcing bars or socket joint allowing the ring beam to be continued.
This support is used if the width of the beam is at least 15 cm lower than the column width. During assembly, the knives are put on the outer side of the webs, slipped into a column shoe, and then tightened with screws in the appropriate holes in the webs.
Hybridbeams can be painted in selected colors using basically any paint. In the description of the beams, we will indicate the types of paints that can be used and examples of paints that should not be used.
The Hybridbeams can be fixed directly (e.g. by screwing with self-drilling elements with a maximum length of 30 mm, so as not to damage the beam’s reinforcement) while ensuring the tightness of the fire protection coating. It is also possible (if this information is known before) to provide a fastening system on the beam e.g. […]
PFEIFER PCC column shoes, like any reinforcement elements in a column (or beam), can fulfill an additional function – an electrical conductor, while ensuring the continuity of the electrical circuit. The specific surface area of the bars in the PFEIFER PCC column shoe system is sufficient for this purpose. This means that the main column […]
In a residential building (house) we’re dealing with a small loads – for this reason it can be assumed that the thickness of the Hybridbeam bottom flange will not be thicker than 12 mm. In the finishing standard, the support of the HC slab is applied on a 10 mm thick elastomer covered with a […]